The advantages of RUNGYU stainless steel reactor

The stainless steel reactor needs all kinds of media for mixing and reaction. The formula enters the stainless steel reactor according to the proportion and is matched with the external force of the stiring system withina certain temperature range so that the raw materials can be converted into the target product, that is, thedesired product.

Simple and convenient stainless steel reactor

1. The starting and parking of the falling film evaporator are simple and fast.
2. It has a liquid distribution device with excellent performance, which is highly adaptable to flow changes and can work efficiently in a wide flow range.
3. The residual material in the evaporator is very small, the start-up time is short, and the material in the evaporator can be quickly emptied after stopping.
4. Evaporation observation and adjustment can be easily carried out through sight glass and liquid level gauge.

Stainless steel reactor is suitable for evaporation of heat-sensitive materials

1. The material can only pass through the heat exchange tube once to complete the heating and evaporation requirements, and the material is heated for a short time, which can ensure the excellent quality of the heat-sensitive material.
2. Under vacuum operation, the quality of heat-sensitive materials can be more reliably guaranteed.

Strong applicability

1. The evaporation temperature requirements of different media can be met by easily adjusting the evaporation temperature.
2. It can be applied to the evaporation operation of most media and the crystallization operation of low viscosity media.

Stainless steel reactor with low energy consumption and easy multi-effect operation

The loss of falling film evaporation temperature difference is small, there is no increase in boiling point caused by liquid static pressure, and a high heat transfer coefficient can still be guaranteed under a small temperature difference (5~7℃ temperature difference can also operate normally and efficiently), so the total heat Under the condition of certain temperature difference, it is easy to realize multi-effect operation, to achieve the purpose of reducing steam consumption.

The reasons for the decomposition and explosion of the stainless steel reactor are as follows: generally, the decomposition and explosion caused by the overpressure and overtemperature of the stainless steel reactor are as follows.

1. Mechanical impurities are brought into the reactor, resulting in local friction and heat, which leads to the decomposition and explosion of the reactor.
Treatment method: Be careful not to fall into mechanical impurities during maintenance.
2. The stainless steel reactor is equipped with a safety valve that is too small or insensitive to open
Treatment method: The sensitivity of the safety valve should be replaced even if it is frequently repaired
3. The increase of gas oxygen content in the processing system will cause the decomposition and explosion of the reactor, usually not more than 1ppm.
Treatment method: strictly control the oxygen content in the processing system.
4. The friction between the stirrer blade and the kettle wall produces local overheating, which causes the stainless steel reactor to decompose and explode.
Treatment method: Improve the quality of maintenance and spare parts.